About us Master Plans
When considering a bathroom remodel project, the tiles are an important
aspect. Not only are the tiles a basic part of the bathroom walls and floors,
they are also important for the overall design. However, choosing the right
tiles for your bathroom is not the only important task. Once you purchase the
tiles, installing them in the bathroom can also take some time. Some people ask
for professional help for laying the bathroom tiles. However, this is an easy
task which can be tackled by anyone at home. There are only a few things that
you would need in order to install the tiles.
Installing the Bathroom Tiles
Installing the tiles in the bathroom is an easy task. In fact, it is the easiest
task in the entire bathroom remodel project. The materials that you would need
are gloves, goggles, sponge, level, tiles, spacers, spreader, grout, pencil and
tape measure and a cutter. Once you have all of these materials ready with you,
follow the below mentioned steps:
Check the Area
Before you actually begin installing the tiles for your bathroom remodel, you
would first have to check he area where you want to install them. Clean the area
and dry the surface so that the installation can be done properly. Remove all
the wallpapers and old tiles carefully.
Work On the Layout
Once you have cleaned the area, you would then need to check if you have the
right number of tiles and see how you would be laying them out. This would also
give you an idea of how the tiles would look when the project is completed. Use
a tape measure to record the inches where you might need to cut a few tiles at
Cut Your Tiles
In the next step you would have to cut the tiles accurately according to the
measurements. Double check all the measurements before you actually cut the
tiles since accuracy is very important. If you are not too confident about this
part of the job, ask someone else to help you.
The next step would be to actually begin the installation process. Start by
putting in spacers. You can spread some adhesive on the wall or the floor and
lay the tile over the area. Use the sponge to remove the excess adhesive.
Continue to do this until the entire area has been tiled. Once done, allow the
adhesive to set overnight.
Fill the Gaps
Once you have completed laying all the tiles and the adhesive has set, you would
then have to add the grout. Mix grout as per the instructions given by the
manufacturer and put on your gloves. Begin by removing the spacers and then
spread the grout in the gaps in between the tiles. Be careful not to make a
mess. Wipe away the excess grout with a sponge. Once you have finished applying
the grout you would have to allow it to harden for two to three days.
Installing bathroom tiles for your bathroom remodel project is extremely easy.
Local Bathroom Renovation Contractors FREE Quote ➨ Local Shower Renovation Contractors Cost Local Install Bathroom Tile Floors Local Showers Walls Local Bathroom Cabinets Countertops Renovation Budget Company
A bathroom remodel can add value to your home and also make it look
beautiful. When you renovate your bathroom or add a second one, it increases
your convenience. However, renovating the bathroom or even adding another
bathroom to your home is a big task and also one which would be a little
expensive. You would need to hire the services of professionals and set up a
Estimating the Costs
If you are planning a bathroom remodel, the first step would be to set up a
budget for the project. Without estimation and a budget, things can be a little
difficult to carry forward. Given below is the guide on how you can estimate the
cost of adding a bathroom to your home:
The Basic Decision
The first thing that you would have to decide is where you want your new
bathroom to be. If your new bathroom is going to be built in the existing square
footage, the cost would be less.
The next thing to do is to measure the entire space and then draw up a detailed
plan. If you need a full bathroom, you would need enough space for a sink,
toilet and a tub. If you have more space, you can think about adding a
whirlpool. If the space is small, just go for a walk in shower, sink and toilet.
Getting the Estimates
Once you have the plan ready with you, you can then contact local contractors to
give you estimates for your bathroom remodel plan. You would need to call a
plumber for installing the drains and pipes and electrician for the power. If
you are planning to do the work yourself, you can save some money.
The Cost of the Fixtures
Check the local hardware stores and online websites to get an idea about the
type of fixtures that you want. Pick the ones you like and write down their
cost. You would need fixtures like a countertop, cabinet, pedestal, lighting,
sink fixtures, mirror, faucet and shower head, towel racks, medicine cabinet
etc. for the bathroom so list down the cost of all of these necessities. Write
down the price of the flooring as per the square footage.
Add Up Your Expenses
Once you have all the details ready with you, you can then add the price for all
the accessories and the fixtures. Add the cost of the professional help that you
would be getting for electricity and plumbing and you would be able to have an
approximate estimation of the cost of the bathroom remodel project.
Estimating the cost of a bathroom remodel or adding up a new bathroom to your
home is not a difficult thing if you remember to add up all the tiny costs. In
most cases, we tend to neglect the cost of the accessories and fixtures which
gives us a wrong figure. Take all the necessary things into consideration and
you would have a close figure for the cost of your bathroom remodel.